
Start with the measurements of the intended wearer, then agree the finished product dimensions and the way each dimension will be measured. A child’s hand or head measurement is not the same as the flat measurement of a glove or hat. The relationship depends on the design, material, stretch and intended fit, so it should be checked on the actual sample.
Which measurements belong in the size brief?
For gloves and mittens, define the hand measurements used by your size chart and specify how they are taken. For hats, record head circumference and where the tape should sit. State the unit, size range and intended age group, but avoid treating age alone as a precise measurement.
Reima’s US size guide provides a useful brand example: it separates glove and mitten sizing from hat sizing and instructs users to take body measurements rather than garment measurements. Its numbers and fit are specific to its own products and should not be copied as a universal standard.
How are wearer measurements different from finished dimensions?
A wearer measurement describes the child; a finished dimension describes the product. For each sample, agree the measurement points, whether the item is measured flat or stretched, and the acceptable tolerance. For example, a knitted hat may stretch, while a lined glove may feel different from an unlined style even when the outside dimensions appear similar. These are development considerations, not a substitute for a fit test.
Keep the size chart, specification sheet and sample revision together. If a dimension changes after fitting, update the relevant documents and identify the approved sample version so the team is comparing the same design.
What should buyers check before approving a size range?
Review representative sizes and ask the development team to document the measurement method, finished dimensions and any fit feedback. Check that the cuff or opening is practical for the intended wearer and that the chart corresponds to the actual style. Decide with the supplier which sizes require further sampling; do not assume a single sample confirms the fit of the whole range.
TU supports private-label accessory development, including sample coordination and revisions. Share the intended market, wearer measurements, target size range, material and any existing fit comments so the project team can assess the appropriate next sample.
Next step
Prepare one size brief with hand or head measurements, the measurement method, target sizes and the current sample reference. Discuss the open fit questions with your supplier before approving the range.
Buying questions
Can we use another brand’s size chart?
Use it as a reference to understand that brand’s approach, not as proof that the same measurements will fit your own design. Confirm your own specification and sample.
Is an age label enough to size a glove?
Age can help describe the intended customer, but a measurement-based brief gives the development team a clearer basis for checking fit.
How should we compare a sample with the size brief?
Use agreed measurement points and units, record whether the item is measured flat or stretched, and keep the sample revision with the size chart. Confirm tolerances and fit on the actual style.
Which details should be shared for a fit discussion?
Share wearer measurements, intended market, target sizes, material, sample reference and existing fit feedback. Agree which sizes require further samples.
Sources
Related product categories
Hats and headwearGlovesReview your project
Share your product, market and requirements to discuss the next step.
Discuss your project →
Discuss a project ↗